Supermicro X8DTT-F Motherboard
Jump to navigation
Jump to search
In this article you will find detailed information about the Supermicro X8DTT-F Motherboard. The motherboard was sold off and is no longer available at Thomas-Krenn.
Motherboard Data
- Manufacturer: Supermicro
- Motherboard: X8DTT-F
- Manual: manual X8DTT-F
- FAQs: FAQs for 'X8DTT-F' bei Supermicro
- Downloads: Supermicro Mainboard X8DTT-F
- Supermicro Motherboard Drivers & Tools CD: CD/DVD Image (Please note, that the files (drivers, tools, ...) on this CD might be out-of-date.)
Features
- Motherboard form factor: 16.64" x 6.5 " (42.26cm x 16.51cm)
- CPU socket: LGA 1366
- RAM:
- Number of DIMM slots: 12
- Memory type: 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM, 72-bit, 240-pin DIMMs
- Possible sizes of Memory Modules: 1GB, 2GB, 4GB , 8GB , 16GB
- Maximum Memory Capacity: 192 GB (ECC Registered memory) oder 48 GB (ECC / Non ECC Unbuffered memory)
- SATA chip: Intel ICH10R
- 6x SATA Ports
- The motherboard supports the following RAID´s: 0, 1, 10 and 5 (RAID 5 only with Windows)
- LAN-Chip: Intel 82576
- Expansion slots:
- 1x PCI-E x16
- Internal I/O ports:
- 6x SATA 2.0 Ports
- 4x USB 2.0 (2x Rear / 2x Front Headers)
- External I/O ports:
- dedicated IPMI 2.0
- 1x COM Port
- 1x VGA
- 2x LAN Ports
- Graphics chip: Matrox G200eW
- Graphic interfaces:
- 1x VGA
- Graphic interfaces:
- IPMI chip: Nuvoton WPCM450R IPMI Chip with AMI-Software
BIOS
BIOS Versions
Recommendation: After a BIOS update load the default settings of the BIOS, and adjust the configuration as suggested below at BIOS Configuration.
- Version 2.0c
- The quality assurance update version release date: 3/18/11.
BIOS Settings
At Thomas Krenn, after loading the default settings the following BIOS configuration adjustments are applied before a server with this motherboard gets its test installation and gets shipped:
Advanced > Boot Feature > Quiet Boot > Disable > PCIe/PCI/PnP Configuration > Load Onboard LAN1 Option ROM > Enabled > Load Onboard LAN2 Option ROM > Enabled
Optionally the configuration of the Settings of the SATA Raids follows depending on the server configuration.
Boot > Set Boot Priority > Floppy > CD/DVD > Festplatte > Netzwerk
IPMI
IPMI Versions
- Version 1.38
- The quality assurance update version release date: 9/7/10.
Software Tools
- Intel Rapid Storage Technology Enterprise (SATA): Enables the Management of an Intel Onboard Raid Controller under Windows.
- Supero Doctor: With this Software the motherboard can be monitored. The available sensors are displayed graphically.
- IPMI View: Centralized Tool Management of the IPMI functions.
Servers with Supermicro X8DTT-F
The following servers have been sold off and are no longer available at Thomas-Krenn:
- 1U Intel Dual-CPU 6016TT Twin-Server (Version 1.0)
- 2U Intel Dual-CPU 6026TT Twin2-Server
Related articles
BIOS security updates LGA 3647 - 1st and 2nd Gen Intel Xeon Scalable processors
Intel MFS2600KI Motherboard
Supermicro X9DRW-3LN4F+ Motherboard