Adaptec Series 6 RAID Controller 6 Gb

In diesem Artikel finden Sie Informationen zu Adaptec Series 6 (Adaptec Unified Serial SAS/SATA 6 Gb) RAID Controllern. Alle Controller im Überblick zeigt der Artikel Adaptec RAID Controller.

Allgemeine Informationen

• RAID Controller Serie: Adaptec Series 6 (Adaptec Unified Serial SAS/SATA 6 Gb)
• Schnittstelle: 6Gb/s SAS (SAS-2) / PCIe 2.0
• Bauhöhe: Low Profile (Slot-Blech für Low Profile und Full Profile enthalten)
• Weitere Informationen:
  • Vier SAS 2.0 RAID-Controller mit 6 Gb/s im Test: Adaptec RAID 6805 (tomshardware.de, 12.09.2011)
  • Linux Drivers For Series 6 Controllers (adaptec.com/weblog, 18.11.2011), aktualisierter aacraid Treiber im Linux Kernel 2.6.39

Modelle

RAID Controller	Ports intern	Ports extern	PCIe Lanes	Cache	Cache-Schutz	RAID-Level	Max. Anzahl SSDs/HDDs bei Verw. von SAS Expandern	Anmerkungen
Adaptec RAID 6405	4	-	8	512MB	Optional (ZMCP)	0, 1, 10, 1E, 5, 50, 6, 60, JBOD, Single Disk	256
Adaptec RAID 6405E	4	-	1	128MB	Nein	0, 1, 10, 1E, JBOD	4
Adaptec RAID 6405T	4	-	8	512MB	Optional (ZMCP)	0, 1, 10, 1E, 5, 50, 6, 60, JBOD, Single Disk	256
Adaptec RAID 6445	4	4	8	512MB	Optional (ZMCP)	0, 1, 10, 1E, 5, 50, 6, 60, JBOD, Single Disk	256
Adaptec RAID 6805	8	-	8	512MB	Optional (ZMCP)	0, 1, 10, 1E, 5, 50, 6, 60, JBOD, Single Disk	256
Adaptec RAID 6805E	8	-	4	128MB	Nein	0, 1, 10, 1E, JBOD	4
Adaptec RAID 6805Q	8	-	8	512MB	ZMCP	0, 1, 10, 1E, 5, 50, 6, 60, JBOD, Single Disk	256	maxCache 2.0
Adaptec RAID 6805T	8	-	8	512MB	Optional (ZMCP)	0, 1, 10, 1E, 5, 50, 6, 60, JBOD, Single Disk	256
Adaptec RAID 6805TQ	8	-	8	512MB	ZMCP	0, 1, 10, 1E, 5, 50, 6, 60, JBOD, Single Disk	256	maxCache 2.0

Versionsinformationen

Build 19109 (21 Dev 2012)

• Release Notes Build 19109, Auszug aus Enhancements and Bug Fixes:
  • Series 6 controllers now have UEFI BIOS support.
  • New maxView GUI is now supported on Series 6 controllers.
  • Resolved an issue that would cause the OS to crash if multiple arrays were deleted at one time via ARCCONF.
  • SGPIO activity signal is now functioning properly.
  • Improved medium error handling.
  • Improved SATA error handling, which could cause slow I/O or a system hang condition.
  • Corrected an issue preventing a drive currently undergoing a secure erase from not appearing in the secure erase drive list after reboot in UEFI.
  • A secure erase operation can now be performed in the UEFI BIOS on physical drives that members of an array.
  • Corrected an issue that could allow the Series 6 controller BIOS to take too long to boot.
  • Resolved an issue where the controller could hang during heavy I/O.
  • Resolved an issue where a hot plug drive was not detected.
  • Identified an issue where SATA negotiation could incorrectly negotiate down to 3.0Gbps.
  • Resolved an issue where a building or re-building array could cause a PSOD in VMware.
  • Resolved a compatability issue when multiple Samsung 830 SSD drives are attached to a Series 6 controller.
• Adaptec maxView Storage Manager v1.0 Readme

Build 19076 (18 May 2012)

• Release Notes Build 18668, Auszug aus Enhancements and Bug Fixes:
  • Improved SAS drive/direct-connect hot plug detection.
  • Improved SAS 6.0Gbps drive negotiation.
  • Improved medium error handling.
  • Removed excessive printing from command line log files during a rebuild.
  • Fixed an issue where a BlinkLED condition could occur during a RAID 10 maxCache BUILD/Verify operation.
  • Fixed an issue where a BlinkLED condition could occur after an unsafe shutdown.
  • Resolved a cosmetic issue within Adaptec Storage Manager, where the array status would report failed after a Forced Online operation is performed.
  • Fixed an issue with the scrollbar not responding as intended within Adaptec Storage Manager.
  • Added maxCache status to ARCCONF.
  • Resolved a cosmetic issue where the default logical name was incorrect when 10 or more arrays were created at a single time.
  • Added maxCache status indicator, similar to a RAID creation, when adrive is being added to the maxCache pool.
• Adaptec Storage Manager v7.3.1 Readme

Build 18668 (09 Dec 2011)

• Release Notes Build 18668, Auszug aus Enhancements and Bug Fixes:
  • New Series 6 controllers released (6405T, 6805T, 6805Q, 6805TQ).
  • Support for maxCache 2.0 read & write back caching (Q models).
  • Big Block Cache Bypass mode for enhanced performance in data center environments.
  • VMWare 5.0 email notification & ARCCONF management support.
  • Several enhancements made to maxCache for improved functionality.
• Adaptec Storage Manager v7.30.18837 Readme

Build 18301

• (Initiale Firmware)

Anmerkungen

Autor: Werner Fischer Werner Fischer arbeitet im Product Management Team von Thomas-Krenn. Er evaluiert dabei neueste Technologien und teilt sein Wissen in Fachartikeln, bei Konferenzen und im Thomas-Krenn Wiki. Bereits 2005 - ein Jahr nach seinem Abschluss des Studiums zu Computer- und Mediensicherheit an der FH Hagenberg - heuerte er beim bayerischen Server-Hersteller an. Als Öffi-Fan nutzt er gerne Bus & Bahn und genießt seinen morgendlichen Spaziergang ins Büro.