Datasheet

2U Intel Single-CPU SC826 Server

[Ver. 3.0]
Highlights at a glance:
  • HDDs up to SAS 6Gb/s or SATA 3Gb/s
  • 12x 3.5" / 2.5" up to
  • Integrated IPMI onboard (onboard “shared” NIC)
  • Redundant, energy-efficient power supply
Mainboards
Mainboards Supermicro X8SIL-F
Chipset Intel 3420 chip set (Ibex Peak)
Socket Intel LGA 1156
Processor Intel Xeon 3400
Main Memory bis zu 32 GB DDR3 800/1066/1333 RDIMM (4 DIMMs)
LAN Onboard 2 x 1 GBit/s LAN (RJ-45)

LAN chipset Intel 82574L
LAN Onboard (dedicated IPMI) 1x Realtek RTL8201N PHY (dedicated IPMI)
Onboard graphic 1x VGA Integrated Matrox G200eW
Onboard Input/Output 2x PS/2
1x Fast UART 16550 Serial Port (RS-232)
1x Internal Serial Header
USB-ports 1x USB on board (type A)
2x USB (rear)


Extension-slots for additional cards
Available slots in the chassis 4 Low profile, Full Length
Storage capacity
Possible number of HDDs 12x 3.5" / 2.5"
Backplane SATA/SAS-2 expander backplane (E16)
Server management
Management software Supermicro SuperDoctor III
Remote management Integrated IPMI onboard (onboard “shared” NIC)
Features IPMI with KVM Over LAN
Serial Over LAN (SOL)
Virtual Media Over LAN (Virtual USB Floppy/CD and Drive Redirection)
LAN Alert-SNMP Trap
Event Log
OS Independent
Hardware Health Monitor
Remote Power Control
Support RMCP & RMCP + Protocols
Fan Speed Control
Dedicated 3. network interface card
Managementsoftware IPMI View
IPMI-sensors CPU-temperature (OK / warning)
system-temperature (Celsius degree)
Electronic voltage (volt)
Cooler speed (RPM)
Additional model-dependent sensors (www.thomas-krenn.com/ipmi-sensoren)CPU-temperature (OK / warning)
system-temperature (Celsius degree)
Electronic voltage (volt)
Cooler speed (RPM)
Additional model-dependent sensors (www.thomas-krenn.com/ipmi-sensoren)
Chassis
Unit 2U
Dimensions 89 mm (H), 437 mm (W), 648 mm (D)
drives (in scope of delivery) not contained, optional available
Drives (optional) External USB-drives
Fan (center) 80x80x38mm (7000rpm, 53.5dBA)
Power supply
Power supply unit 2HE Supermicro Chassis SC826E16-SAS2
energy efficiency 92.4%
PMBus support Yes, Ver.1.1
Rack Assembly
Assembly rails contained in the scope of supply
rail length 675 - 880 mm
Total length server front to end of assembly rail 820 mm
Max. extraction length 670 mm
Recommended maneuvering space 75 mm (minimum)
environment-requirements
Recommended environment-temperature (appropriate BSI) 20 - 22 degree
Recommended air humidity (appropriate BSI) max. 40%