Datenblatt

1HE AMD Single-CPU RA1104-SMEPFH Server

[Ver. 1.0]
Highlights auf einem Blick:
  • Inkl. 1x AMD EPYC 7252, aufrüstbar mit einer CPU (AMD EPYC 7002/7003 (Rome/Milan)) bis zu 16 Cores
  • Inkl. 16 GB RAM, aufrüstbar bis zu 1TB RAM, (8 DIMMs)
  • 4x 2,5" (non Hot-Swap) bis zu 30.72 TB (Non-Hotswap)
  • Erweiterbar mit 2 LP/ HL Zusatzkarte(n)
  • Platzsparend durch 429 mm (T) Einbautiefe
  • Energieeffizientes Netzteil 80plus Platinum (> 94%)
  • Integriertes IPMI (dedizierte NIC)
Mainboard
Hersteller Supermicro
Supermicro
Mainboard Supermicro H12SSW-iN Supermicro H12SSW-NT
Sockel AMD SP3 AMD SP3
Prozessor AMD EPYC 7002/7003 (Rome/Milan) AMD EPYC 7002/7003 (Rome/Milan)
Hauptspeicher 8 DIMMs
1 TB DDR4 3200 RDIMM/SDRAM Registered
8 DIMMs
1 TB DDR4 3200 RDIMM
LAN Onboard 2x 1 Gbit/s LAN (RJ-45)
2x 10 Gbit/s LAN (RJ-45)
LAN Chipsatz Broadcom BCM5720L Broadcom BCM57416
LAN Onboard (dedicated IPMI) 1x Realtek RTL8211E PHY (dedicated IPMI) 1x Realtek RTL8211E PHY (dedicated IPMI)
Onboard Grafik 1x VGA 1x VGA
Onboard Input/Output USB (keine PS2-Anschlüsse!)
1x TPM 2.0 Header
1x COM Port (rear)
USB (keine PS2-Anschlüsse!)
1x TPM 2.0 Header
1x COM Port (rear)
USB-Ports 4x USB Rear (USB 3.0)

1x USB on Board, Typ A (USB 3.0)
4x USB Rear (USB 3.0)

1x USB on Board, Typ A (USB 3.0)
Erweiterungsslots für Zusatzkarten
PCI-Slots (Mainboard) 2x PCI-E 4.0 x16

2x PCI-E 4.0 x16
Verfügbare Slots im Chassis 2x Low Profile/Half Length/Full Profile 2x Low Profile/Half Length/Full Profile
Mögliche Riserkarten 2x PCI-E (x16) Riserkarte
2x PCI-E (x16) Riserkarte
Onboard Ports
SATA-3 (6 Gb/s) 16x SATA-3 (6 Gbit/s)

16x SATA-3 (6 Gbit/s)
M.2 2 x M.2 PCI-E 3.0 x2, SATA 2 x M.2 PCI-E 3.0 x2, SATA
M.2 Formfaktor 2280, 22110 2280, 22110
NVMe 4x NVMe onboard 4x NVMe onboard
Datenträger / Speicherkapazität
Datenträger Slots (gesamt) 4x 2,5" (non Hot-Swap)
4x 2,5"

SAS / SATA Slots 4x SAS / SATA
Backplane ohne Backplane
Max. Kapazität HDD (SATA) 30.72 TB
Max. Kapazität SSD (SATA) 30.72 TB
Servermanagement
Management-Software Supermicro SuperDoctor 5
Remotemanagement Integriertes IPMI (dedizierte NIC)
Features Managementsoftware IPMI View
IPMI with KVM Over LAN
Serial Over LAN (SOL)
Virtual Media Over LAN (Virtual USB Floppy/CD and Drive Redirection)
LAN Alert-SNMP Trap
Event Log
OS Independent
Hardware Health Monitor
Remote Power Control
Support RMCP & RMCP + Protocols
Fan Speed Control
Dedizierte 3. Netzwerkkarte
IPMI-Sensoren CPU-Temperatur (OK / Warnung)
System-Temperatur (Grad Celsius)
Elektrische Spannungen (Volt)
Lüfter Drehzahlen (RPM)
Chassis
Höheneinheit 1HE
Abmessungen 43 mm (H), 437 mm (B), 429 mm (T),
Laufwerke (im Lieferumfang) nicht enthalten, optional erhältlich
Laufwerke (optional) Externe USB-Laufwerke
Lüfter (Rückseite) 4x 40x56mm Fans 40x56mm non-Hotswap (11000rpm, )
Silent-Lüfterkit Option nein
Stromversorgung
Netzteil 350 Watt Netzteil (80plus Platinum)
Energieeffizienz 94%
PMBus Unterstützung Nein
Rackmontage
Montageschienen im Lieferumfang enthalten
Umgebungsanforderungen
Empfohlene Umgebungstemperatur 10 - 35 °C
Empfohlene Luftfeuchtigkeit 10 - 90% (noncondensing)
Empfohlener Einsatzort Um die optimale Kühlung des Systems zu gewährleisten, empfehlen wir, den Server in einem klimatisierten Serverraum in einem dafür vorgesehenen Rack zu betreiben. Der Server eignet sich aufgrund der hohen Geräuschentwicklung nicht für den Einsatz im Büro.